GM/Chevy Canyon/Colorado 2.8L Full Delete Bundle | 2016-2020

When you install the delete tune, your truck will no longer have emission related codes or warnings. 

This includes all

1) “See Dealer” codes

2) Check engine codes

3) “Exhaust system service required” codes

4) Limp Mode codes

5) Other emissions related diagnostic codes

2016, 2017, 2018, 2019, 2020 GM/Chevy Canyon/Colorado 2.8L Duramax.

WILL NOT WORK ON THE 3.0L Model. If you have a 2020, make sure it is the 2.8L

The Full Delete bundle(s) will permanently upgrade your truck to work without the suffocating factory emissions system.

This means you can remove ALL emissions-related parts and sensors for good, including the:

- DPF (Diesel Particulate Filter)

- DEF tank (Diesel Exhaust fluid)

- EGR System (Exhaust Gas Recirculation)

- CAT (Catalytic Converters, including DOC and NOX, etc.)

This is made possible by our custom delete tunes that wipe away the emissions system from your truck’s computer.

All you have to do is: 

Plug the tuner into your truck’s OBDII port (located under the steering wheel)

Follow the tune installation instructions we sent you. (Tech support is also available).

Once the pesky emissions system is “deleted” from your truck’s programming, you can proceed to remove all of the parts that are holding your diesel back from running at its best.

Our kit includes a full exhaust system that will forever remove the DPF and CAT in the exhaust system.

The Bundle Includes:

1) Delete programmer with delete Tune.

2) Full Length Aluminized Exhaust System with Muffler.

The EGR delete kit for these trucks that was developped has had too many fitment issues for us to feel comfortable to include in our package.

The Delete tune will full shut down the EGR system and the valve will remain closed. Simply unplug the EGR sensors after installing the delete tune and you are good to go.

By deleting the factory emission system which has been suffocating your diesel, you’ll immediately notice a night and day difference. It will perform better in every imaginable way, including speed, fuel economy (5 mpg increase on average), and fewer trips to the autobody shop.

Over time, the kit pays for itself with the fuel savings alone. That’s not even considering how many costly trips to the dealer you’ll be saving yourself.

The last benefit is peace of mind, knowing your truck no longer has a ticking time bomb attached to it.

Not tech savvy? Nervous about the software or potentially frying your truck? No worries! With every purchase, we send you a step-by-step instruction guide. Further tech support is also available should any issues arise.

And yes, if you run into any technical issues, we got your back. You can contact us anytime and we’ll resolve any issues you may encounter.

To install the DPF delete pipe, you’ll need basic tools you probably already own (things like wrenches, ratchets, etc.). There is no welding required; it is installed using bolts and clamps (which we provide).

If you are a complete fish out of water when it comes to working on your truck, we highly recommend hiring a shop to do the install for you.

The tune included is a single tune file.

Either factory power (No horse power added, or +60 Horse Power).

You can chose the setting you one, but you only get one.

You chose your tune file after you receive your package. Instructions on how to do so are included in your package.

With standard shipping, you’ll receive your kit within 4-8 business days from the moment you placed your order.

Express shipping is NOT available for this product.

This product is built to order and not eligible for returns or refunds.