Ram Cummins 6.7 Full Delete Bundle | 2007-2009

When you install the delete tune, your truck will no longer have emission related codes or warnings. 

This includes all

1) “See Dealer” codes

2) Check engine codes

3) “Exhaust system service required” codes

4) Limp Mode codes

5) Other emissions related diagnostic codes

2007, 2008, 2009 Ram Cummins 6.7L Diesel 2500, 3500

The kits will fit all PICK-UP trims, cab and box lengths.

This kit will NOT fit the Cab & Chassis trucks. For all Cab & Chassis trucks, please reach out to our team at 888-830-2588

The Full Delete bundle(s) will permanently upgrade your truck to work without the suffocating factory emissions system.

This means you can remove ALL emissions-related parts and sensors for good, including the:

- DPF (Diesel Particulate Filter)

- DEF tank (Diesel Exhaust fluid)

- EGR System (Exhaust Gas Recirculation)

- CAT (Catalytic Converters, including DOC and NOX, etc.)

This is made possible by our custom delete tunes that wipe away the emissions system from your truck’s computer.

All you have to do is: 

Plug the tuner into your truck’s OBDII port (located under the steering wheel)

Follow the tune installation instructions we sent you. (Tech support is also available).

Once the pesky emissions system is “deleted” from your truck’s programming, you can proceed to remove all of the parts that are holding your diesel back from running at its best.

Our kit includes a DPF/CAT delete pipe that bolts in place of the original DPF and CAT in the exhaust system.

Lastly, the EGR delete kit will allow you to fully remove the original EGR system, seal shut the openings, and reroute the exhaust to flow out of the pipe.

The Bundle includes:

1) EFI Live Delete Tuner and all required accessories. Rotary switch to change power levels

2) 4” Stainless Steel DPF & CAT Delete Pipe

3) Complete EGR Delete Kit

1) EzLynk Delete Tuner and all required accessories. Rotary switch to change power levels

2) 4” Stainless Steel DPF & CAT Delete Pipe

3) Complete EGR Delete Kit

By deleting the factory emission system which has been suffocating your diesel, you’ll immediately notice a night and day difference. It will perform better in every imaginable way, including speed, fuel economy (5 mpg increase on average), and fewer trips to the autobody shop.

Over time, the kit pays for itself with the fuel savings alone. That’s not even considering how many costly trips to the dealer you’ll be saving yourself.

The last benefit is peace of mind, knowing your truck no longer has a ticking time bomb attached to it.

Not tech savvy? Nervous about the software or potentially frying your truck? No worries! With every purchase, we send you a step-by-step instruction guide. Further tech support is also available should any issues arise.

The good news is, our the EZ lynk device comes preloaded with your delete tunes, just plug it into your truck’s OBDII port and follow our instructions to install your tune. 

The EFI live will require more steps, read tab below.

And yes, if you run into any technical issues, we got your back. You can contact us anytime and we’ll resolve any issues you may encounter.

To install the DPF delete pipe, you’ll need basic tools you probably already own (things like wrenches, ratchets, etc.). There is no welding required; it is installed using bolts and clamps (which we provide).

All of the pieces of the EGR delete kit are bolt on as well, no welding required. We will email you installation videos for these parts as well.

If you are a complete fish out of water when it comes to working on your truck, we highly recommend hiring a shop to do the install for you.

If you order the EFI live device, please note, the delete tunes are NOT preloaded on this device.

You will be emailed your delete tunes.

You will then use the EFI Live V8 software (Free to install) to download the delete tune from your computer to your EFI Live device.

We will provide basic instructions on how to do this, but please be aware, a Windows 7+ Computer Required is required, no Macs or old PCs.

In addition, basic computer skills are required.

We recommend the EZ Lynk bundle if this sounds like too much hassle for you.

If you choose EZ Lynk Bundle, you do not need a computer, the following is only for the EFI Live Bundle:

To make sure you don't run into any problems with your EFI Live delete tuner, make sure your computer or laptop meets the minimum system requirements.

Software: EFI Live Scan & Tune Software V8. Download it for free at EFI Live's website.

Operation System: PC or Laptop with Windows 7, 8, 8.1, 10 or 11. Not compatible of Macintosh or Linux.

Connectivity: One available USB port to connect the EFI Live tuner to your computer.

Display: We recommend a standard monitor or laptop screen.

Storage: Minimum of 1GB of available hard drive space.

Sometimes, your device may show an error code. Do not panic. It is an easy fix.

Every vehicle is unique. In the event that you receive an error code, don’t worry. These issues are super easy to resolve.

All you need to do is Open A Support Ticket

Our support team will respond typically in a few hours during business hours and assist you right away.

The Custom EFI Live Tune Includes multiple power levels so you can run your truck the way you want to.

The included switch will let you change between the power levels in real time (aka: "Shift on The Fly").

Level 1- "Stock" +0HP. Ideal for daily driving, towing.

Level 2- (+30HP). Ideal for daily driving, light towing.

Level 3- (+65HP). Ideal for daily driving.

Level 4- (+100HP). Ideal for daily driving and performance applications.

Leve 5- (+130). Ideal for performance applications.

The Custom EzLynk Tune Includes multiple power levels so you can run your truck the way you want to.

The included switch will let you change between the power levels in real time (aka: "Shift on The Fly").

Level 1- "Stock" +0HP. Ideal for daily driving, towing.

Level 2- (+40HP). Ideal for daily driving, light towing.

Level 3- (+80HP). Ideal for daily driving.

Level 4- (+120HP). Ideal for daily driving and performance applications.

Leve 5- (+160). Ideal for performance applications.

Transmission tuning is included for EFI Live & EzLynk devices

With standard shipping, you’ll receive your kit within 6-10 business days from the moment you placed your order.

With express shipping, you’ll receive your kit within 4-6 business days from the moment you placed your order. Express shipping has an additional cost of $199 for this bundle.

We have different return policies for each item in the bundles, please read carefully:

1) The EFI Live is a built to order product and not eligible for refunds and cancellations. We guarantee the tuner will work. If you received a faulty or damaged tuner we will replace it. Please refer to the IMPORTANT EFI LIVE INFORMATION tab for more information about the EFI Live tuner. 

2) The DPF Delete Pipe is eligible for returns only if it is unused (ie: it was never installed on your truck) within 30 days of purchase. You are responsible for return shipping fees. There is also a $100 restocking fee.

3) The EGR Delete Kit is eligible for returns only if it is unused (ie: it was never installed on your truck) within 30 days of purchase. You are responsible for return shipping fees. There is also a $30 restocking fee.