EFI Live Autocal V3 Dodge Ram 6.7L Cummins 2007-2021 | Delete Tuner

Truck years :

2007,2008,2009,2010,2011,2012,2013,2014,2015,2016,2017,2018,2019,2020,2021 6.7L.

Models:

Compatible with Ram 2500, 3500, 4500 & 5500. Pick Up and Cab & Chassis models

✅ Next Generation DPF & EGR Delete Tuner

✅ Bullet-proof Engine Reliability

✅ Massive Fuel Savings

✅ Transmission Tuning

✅ Automatic Firmware Updates & Tech Support

✅ Live Metric Monitoring via Ez Lynk Application

✅ Simple Plug & Play Tune Installation

When you install the delete tune, your truck will no longer have emission related codes or warnings. 

This includes all

1) “See Dealer” codes

2) Check engine codes

3) “Exhaust system service required” codes

4) Limp Mode codes

5) Other emissions related diagnostic codes

By deleting the factory emission system which has been suffocating your diesel, you’ll immediately notice a night and day difference. It will perform better in every imaginable way, including speed, fuel economy (5 mpg increase on average), and fewer trips to the repair shop.

Over time, the kits pays for itself with the fuel savings alone. That’s not even considering how many costly trips to the dealer you’ll be saving yourself.

The last benefit is peace of mind, knowing your truck no longer has a ticking time bomb attached to it.

The EFI Live delete tuner will permanently upgrade your truck to work without the suffocating factory emissions system.

This means you can remove ALL emissions-related parts and sensors for good, including the:

- DPF (Diesel Particulate Filter)

- DEF tank (Diesel Exhaust fluid)

- EGR System (Exhaust Gas Recirculation)

- CAT (Catalytic Converters, including DOC and NOX, etc.)

This is made possible by our custom delete tunes that wipe away the emissions system from your truck’s computer.

Steps:

You will then use the EFI Live V8 software (Free to install) to download the delete tune from your computer to your EFI Live device.

We will provide basic instructions on how to do this, but please be aware, a Windows 10+ Computer Required is required, no Macs or old PCs.

After your download the delete tune into your EFI Live device, plug the EFI Live into your OBDII port (under your steering wheel).

Follow the tune installation instructions we sent you. (Tech support is also available).

Once the pesky emissions system is “deleted” from your truck’s programming, you can proceed to remove all of the parts that are holding your diesel back from running at its best.

You will need to install a DPF Delete Pipe after you install this tune.

(The only exception are the older Duramax models that do not have a DPF)

You can find the DPF Delete pipes and exhaust systems here

If you need a full delete bundle, that includes this tuner, delete pipe and egr delete, find it here.

1) EFI Live Autocal with all required cables and accessories

2) Delete Tune customized to your specific truck (NOT Preloaded, requireds Windows 10+ computer to install).

3) DSP5 Switch for shifting power levels on the fly

4) Step by Step Delete Tune Installation Instructions (emailed to you)

To make sure you don't run into any problems with your EFI Live delete tuner, make sure your computer or laptop meets the minimum system requirements.

Software: EFI Live Scan & Tune Software V8. Download it for free at EFI Live's website.

Operation System: PC or Laptop with Windows 10 or 11. Not compatible of Macintosh or Linux.

Connectivity: One available USB port to connect the EFI Live tuner to your computer.

Display: We recommend a standard monitor or laptop screen.

Storage: Minimum of 1GB of available hard drive space.

All Cab & Chassis trucks only come with a single tune file and not DPS5.

It is a +50HP tune.

A Cab & Chassis truck is one that says "Incomplete Vehicle" below the VIN on the registration sticker, typically found on the driver door.

Most Cab & Chassis trucks are the 4500 and 5500 models.

If you have a Cab & Chassis model with a single fuel tank, please contact us before purchasing as certain model years are not compatible.

Not tech savvy? Nervous about the software or potentially frying your truck? No worries! With every purchase, we send you a step-by-step instruction guide.

And yes, if you run into any technical issues, we got your back. You can contact us anytime and we’ll resolve any issues you may encounter.

If you run into issues, open a support ticket here

The Custom EFI Live Tune Includes multiple power levels so you can run your truck the way you want to.

The included CSP4/5 switch will let you change between the power levels in real time (aka: "Shift on The Fly"). 2007-2018 models only.

2007-2018 Ram 6.7L Models ( Includes Shift On the Fly )

Level 1: "Stock" +0HP. Ideal for daily driving, towing, and best MPG.

Level 2: +65HP. Ideal for daily driving, towing.

Level 3: +100HP. Ideal for daily driving, towing.

Level 4: +130HP. Ideal for performance applications.

2019-2021 Ram 6.7L Models (No Shift on the fly)

Level 1: "Stock" +0HP. Ideal for daily driving, towing, and best MPG.

Level 2: +45HP. Ideal for daily driving, towing.

Level 3: +70HP. Ideal for daily driving, towing.

Level 4: +100HP. Ideal for performance applications.

Sometimes, your tuner may show an error code. Do not panic. It is an easy fix.

Every vehicle is unique. In the event that you receive an error code, don’t worry. These issues are super easy to resolve.

All you need to do is click this link to create a ticket

Our tune technicians will respond to your request within 1 business day.

Q: Can I revert back to OEM/Factory settings?

• Yes! You will have the ability to revert back if needed be via the tuner directly.

Q: Do I have to delete ALL emissions parts?

• You have to delete the DPF. But all emissions systems are shut off with the tune, so you can unplug any sensors/wiring where applicable. EGR deletes are optional but highly recommended for the best reliability. At the very least make sure to unplug the EGR wiring harness.

Q: Does the tuner need to remain plugged in?

• Once the delete tune is installed, you can unplug the EZ Lynk. But you'll need it plugged to use its other features. If you are using the Shift on the fly features, you will only require the switch to be installed and the correct tune file installed.

Q: Can I tune multiple trucks?

• Yes, but you will need additional tune packs for each truck you wish to delete. If you already have an EZ Lynk device, you can purchase additional tune packs here.

Q: How do I receive my tune file?

• TThe Ez-Lynk uses cloud software. Once you plug in your Ez Lynk into the OBD-II port, the device will recognize your VIN and show your list of tunes.
  

Q: Does the EZ-Lynk have a screen?

• No. You can use any Apple or Android device to control the EZ-lynk via the Auto Agent 3 app. 

Shipping

Once you order an EZ-Lynk, look for an email asking to fill out a custom tune form. Once we receive the completed tune form, we will process your order within 1-2 business days.

Standard shipping will take 4-8 business days.

Express shipping is available at the end of checkout and will take 2-3 business days.

* Note: Alaska, Hawaii and some Canadian locations will be subject to additional freight charges

EZ LYNK Return Policy

Your EZ-Lynk purchase contains a VIN specific, custom tune file. As a result it cannot be returned. Once we receive the tune form from you, we will no longer honor the refund of a cancelled order. If you receive a faulty tuner we will replace it. If you experience technical difficulties, contact us at support@thedieseldudes.com if you have any questions.